Fiberlock RECON Smoke Odour Sealer, White, 5 Gallon Pail, FLK3090-5 / 3090-5

CODE: FIB3090-5

RECON Smoke Odor Sealer is a revolutionary solvent free smoke odor sealant and stain blocker designed to encapsulate malodors on multiple surfaces and block the toughest stains. RECON Smoke Odor Sealer with OdorLock technology is water based, permeable and is not flammable. Unlike typical water based coatings that "wick" smoke odors and stains out of the substrate as they dry, RECON Smoke Odor Sealer with OdorLock technology prevents smoke odors and stains from migrating through the coating while maintaining its breathability. This technology provides one coat odor control on most surfaces and continues to block odors even with seasonal changes in temperature and humidity. RECON Smoke Odor Sealer (SOSTM) is your final step to encapsulate residual odors typically found on fire damage restoration projects.

Try the Fiberlock RECON ULTRA version in white (FLK3092-5) or clear (FLK3093-5)

Features

• Permanently encapsulates smoke odors
• Highly permeable; doesn't trap moisture
• Can be applied in ductwork
• Excellent stain blocker
• Water based and non-flammable
• Bonds to nearly any substrate
• Ideal for use in wall cavities

Specifications

• Coverage:  Smooth Surfaces - 200 to 300 ft²/gallon. Porous Surfaces - 100 to 200 ft²/gal
• Colour:  White
• Shelf Life:  36 Months Min. (Original Sealed Container)
• Drying Times (@ 70 - 77°F , 50% R.H.):  To Touch - 30 mins. To Recoat - 4 hours. Top Coat - 24 hours.
• Flash Point:  Non-combustible 
• Calculated VOC:  68 grams/liter
• Viscosity at 70°F:  75 Kreb Units
• Package Size:  5 Gallon Pail
• Ready to use:  Yes
• Product Number:  FLK3090-5 / 3090-5

Product Application

Surface Preparation: Prior to applying Fiberlock's RECON Smoke Odor Sealer (SOSTM) it is critical that the substrate be thoroughly cleaned. Smoke odor encapsulation is a final step that needs to be part of a comprehensive smoke/odor management protocol. This protocol should include the following steps: Odor Cleaning, Odor Neutralization and Odor Encapsulation.

Application Tools: Apply RECON Smoke Odor Sealer with a brush or airless spray equipment.

• Brush: Synthetic, nylon or polyester bristle Roller: Not recommended
• Spray Settings:
• Pressure: 2200-3000 P.S.I.
• Tips: .017 to .023 tips

Application: Apply RECON Smoke Odor Sealer generously and uniformly by brush or airless spray. Roller application is not recommended. Apply one coat of RECON Smoke Odor Sealer and ensure that the finished surface is properly sealed. To ensure that the finished surface is properly sealed, two-coats may be required on some porous or heavily stained surfaces. Topcoat floor applications when foot traffic or heavy storage is expected. RECON Smoke Odor Sealer is tintable up to 2 oz. of universal liquid colorant per gallon.

HVAC Application: RECON Smoke Odor Sealer can be used to encapsulate malodors within HVAC systems as part of fire damage restoration. This product can be used in both fiberglass lined and unlined ductwork. Surfaces should be clean, dry and sound prior to application. RECON Smoke and Odor Sealer meets requirements of NFPA 90A/90B standard.

Top Coating: Wait at least 24 hours prior to topcoating @ 70 - 77°F, 50% R.H. Lightly sand and clean surface of Recon Smoke Odor Sealer prior to topcoating. Do not topcoat Recon Smoke Odor Sealer with anything less than a quality 100% acrylic latex coating with an eggshell sheen or higher. Avoid enamel, alkyd and oil based paint topcoats. Test patch prior to application is recommended. Failure to follow these guidelines could result in cracking or "alligatoring" on certain substrates.

Cleanup: Clean tools and drippings with warm soapy water before RECON Smoke Odor Sealer dries. Dispose of waste according to all existing local, state and federal regulations.

Precautions: Store in a dry place at temperatures between 50°F (10°C) and 90°F. (32°C). Stir thoroughly. Do not mix with any other coatings, solvents or colors in oil. Do not apply when air or surface temperature is below 50°F, or when drying conditions are poor or when surfaces are above a 15% moisture level content. Use adequate ventilation during application. When applying with a sprayer, wear a NIOSH approved respirator with any R, P, N or HE filter. For interior use only.