Bridgepoint Systems Encapuclean O2, Encapsulation Cleaner, Carpet Prespray, 1 Gallon, CC17GL / 121776 / 1676-2712

CODE: BP1676-2712

Encapuclean O2 combines a synergistic hydrogen peroxide detergent blend with a special encapsulating polymer to bring you the most versatile encapsulation product available. The unique peroxide boost in Encapuclean O2helps activate the other key ingredients enabling it to remove soils and stains from any source. As with other products in the Encapuclean family, the encapsulating polymer bonds to, surrounds, and encapsulates soil allowing it to be removed from the carpet during routine post-vacuuming. In addition, the unique polymer blend helps resist soiling long after the cleaning process. Encapuclean O2 contains no harsh solvents or high pH phosphates, making it safe and effective to use on all synthetic carpet and wool.

Encapuclean O2 can be used effectively as a hot water extraction prespray, a low moisture encapsulation cleaner, a bonnet cleaning solution, an encapsulating hot water extraction rinse, and as a carpet spotting agent. For low moisture encapsulation cleaning, it can be used in conjunction with a Brush Pro counter-rotating cylindrical brush agitation machine, a Cimex Machine, as part of a bonnet cleaning system, and with an oscillating agitation machine.

Features

• Can be uses as encapsulation cleaning, bonnet cleaning, carpet spotting, carpet pre spray, carpet extraction rinse, upholstery cleaning
• Remove soils and stains from any source
• Helps resist soiling long after the cleaning process
• Contains no harsh solvents or high pH phosphates

Specifications

• Coverage:  Dependent on application
  
• Form:  Liquid
• Colour:  Colourless
  
• Odour:  Peroxide
  
• RTU pH:  5.5
• Package size:  3.79 L (1 US Gal)
• Ready to use:  No
• Dilution ratio:  1:12
• Product Number:  CC17GL / 121776 / 1676-2712

Product Application

Always pretest surface being cleaned for colorfastness.

Encapsulation Cleaning:

• Using a pump or electric sprayer, mix one part Encapuclean O2 with 12 parts water (10 ounces per gallon) in an even, overlapping pattern toarea being cleaned.
• Agitate the solution into the carpet thoroughly and allow to dry. (It is not mandatory to vacuum immediately after carpet is dry. Vacuuming can be done at next scheduled interval).
• NOTE - Any one of the industry standard agitation machines can be used which include, but are not limited to counter rotating cylindrical brush machines, rotary machines and oscillating or orbital machines.

Bonnet Cleaning:

• Using a pump or electric sprayer, mix one part Encapuclean O2 with 12 parts water (10 ounces per gallon) in an even, overlapping pattern to area being cleaned.
• Agitate the solution into the carpet thoroughly with your absorbent pad and allow to dry. Micro-Fiber bonnets are recommended. (It is not mandatory to vacuum immediately after carpet is dry. Vacuuming can be done at next scheduled interval).

Carpet Spotting:

• Mix one part Encapuclean O2 with four parts water (32 ounces per gallon).
• Saturate spot being treated with the mixed solution and let dwell for up to five minutes. Blot with absorbent white towel. Extraction not normally required.

For Use as Carpet Pre Spray:

• Using a pump or electric sprayer, mix one part Encapuclean O2 with 12 parts water (10 ounces per gallon) in an even, overlapping pattern to area being cleaned.
• Apply evenly to area being cleaned to effectively suspend soils and oils (typically at an equal rate of standard carpet pre spray) and let dwell for five to ten minutes.
• Agitate heavy traffic areas when needed.
• Extract carpet with appropriate Bridgepoint extraction agent.

For Use as Carpet Extraction Rinse:

• Truckmount Extraction - Mix one quart Encapuclean O2 (32 ounces) per five gallons of water. Meter at two to four gallons per hour.
• Portable Extraction - Mix two ounces Encapuclean O2 per five gallons of water and extract as normal.

Upholstery cleaning agent:

• Using a pump or electric sprayer, mix one partEncapuclean O2 with 12 parts water (10 ounces per gallon) in an even, overlapping pattern to fabric being cleaned.
• Agitate with horse hair brush or hand bonnet.

Low Moisture Cleaning - Allow to dry after agitation and vacuum off.

Extraction Cleaning - Whether truckmount or portable, extract with clear water rinse.