Viper Stone Perfect is a high-powered cleaning agent for restoration cleaning of natural stone such as marble, granite, limestone, travertine, slate and sandstone.
When used as directed, Viper Stone Perfect is safe to use on stone and will not damage surfaces, as it powers its way through grease, oil, spills, and soiling.
Viper Stone Perfect is used as a prespray on stone and grout to loosen and emulsify soils and stains, and to facilitate soil removal. Viper Stone Perfect is powerful, yet sensitive enough for fine stone surfaces with its hard-hitting blend of builders, solvents, and surfactants. It is also ideally suited for cleaning stone that has fire and smoke damage.
*Formerly Spinergy StonePerfect.
Features
- High powered restorative cleaning agent for heavily soiled stone surfaces.
- Powers its way through caked-on grease and oxidized oils.
- When used as directed, will not harm sensitive stone surfaces.
- Contains no chelating agents that could attack the minerals in natural stone.
Specifications
- Coverage: Dependent on application
- Form: Liquid
- Colour: Clear
- Odour: Mild
- pH: 11.3
- Package size: 1 Gallon (3.79 L)
- Ready to use: No
- Dilution: 8 to 64 oz per gal
- Dilution ratio: 1:2 up to 1:16 depending on application
- Product number: CST01GL / 203960 / 2690-0631 / BP2690-0631
Product Application
Dilute: For normal soiling, mix eight ounces of solution per gallon of warm or hot water (1:16) into a professional spray applicator. For heavy soiling, mix 64 ounces of solution per gallon of warm or hot water (1:2) into a professional spray applicator. For use with Hydro-Force Sprayer, add one quart (32 oz) of Viper Stone Perfect to Hydro-Force jug and fill with water. Use standard 1:8 yellow metering tip.
Pre-spray: Apply mixed solution with sprayer evenly and liberally across surface to be cleaned. If preferred, you can apply mixed solution with a damp mop, sponge, or other appropriate professional equipment.
Extract: For best results, extract cleaning solution using Viper Neutral Stone Cleaner with a rotary agitation surface tool such as a Hydro-Force SX-15 or Hydro-Force SX-7. On sensitive surfaces such as soft marble, make sure the floor has been thoroughly vacuumed or swept to remove pebbles, sand or other abrasive material prior to cleaning. For especially sensitive finishes, use the Hydro-Force Gekko tool with brush head for extraction.
Dry: Accelerate drying with air movement and be sure to eliminate puddling in grout lines (if applicable).
Protect: To protect stone surfaces from future stains and spills, consider application of Viper Prestige Water-based or Solvent-based Impregnating Sealers.
- No
No posts found
