Bridgepoint Systems Fabric Prespray, For Fine Fabrics, Carpets & Rugs, 3.79L Gallon, CU65GL / 121879 / 1689-2717

CODE: BP1689-2717

Fabric Pre-Spray. The perfect choice whenboth fiber safety and aggressive cleaning are necessities. This prespray uses high-grade solvents, which eliminates the need for high alkalinity, reducing the danger of browning or bleeding. It's effective on a wide variety of soils and stains on any wet cleanable upholstery carpet or rug where a low pH is desirable.

Features

• A unique combination of detergents, solvents, and builders, formulated to emulsify the toughest soils and oils found in upholstery.
• Best used for pre-conditioning of fabrics and carpets prior to overall wet cleaning.

Specifications

Product Application

Upholstery Cleaning

For normal cleaning: Dilute 16 ounces of Fabric Prespray to one gallon of hot water (1 to 8).

For heavy cleaning: Dilute 21 ounces of Fabric Prespray to one gallon of hot water (1 to 6). Apply evenly to soiled areas of upholstery. Agitate with a horsehair brush. Allow to stand 5 minutes, then rinse/extract. Mist upholstery or rugs lightly with a dilute solution of Fab-Set neutralizer (8 ounces per gallon of water - 1:16).

Carpet Cleaning

For normal cleaning: Dilute 8 ounces of Fabric Prespray to one gallon of hot water (1 to 16).

For heavy cleaning: Dilute 16 ounces of Fabric Prespray to one gallon of hot water (1 to 8). Apply evenly to soiled areas of the carpet. Agitate with a groomer or brush and allow to stand 5 - 10 minutes, then rinse/extract. Mist upholstery or rugs lightly with Fab-Set diluted at 8 ounces per gallon (1 to 16).

Bonnet Cleaning: Dilute 16 ounces of Fabric Prespray to one gallon of hot water (1 to 8) and spray evenly over the carpet. Bonnet clean as normal. Effective on all types of soils.

Note:  Prior to application test carpet or fabric in an inconspicuous place for dye stability.